Trim, cut and convert audio in your browser

Audio Converter

Open any common audio file and save it in another format.

Free · runs in your browser · nothing is uploaded

Open on Tone Snip

This embed was switched off for this website. Open on Tone Snip

Want this audio tool on your own site? The embed code is on the about page. Embed code

An audio converter changes a sound file from one format to another, and this one does it inside the browser. Open an MP3, M4A, AAC, OGG, Opus, FLAC, WAV or AIFF file, pick an output format, and download the result. The output can be MP3, WAV, OGG Vorbis, FLAC or M4A (AAC). Along the way you can change the sample rate and switch between mono and stereo, and you can convert just a selected part of the file instead of all of it. The save panel shows an estimate of the size before you convert, and a progress bar with a Cancel button runs during a long file. Tags and cover art are not copied.
Audio converter example

How to convert an audio file

  1. Press Choose audio file, or drop a file onto the page, and wait for the waveform.
  2. Optionally drag across the waveform to convert only a part. With no selection the whole file is used.
  3. In the Save panel, open the Format list and choose MP3, WAV, OGG Vorbis, FLAC or M4A.
  4. Set the details for that format. WAV offers 16-bit, 24-bit or 32-bit float, FLAC 16-bit or 24-bit, OGG four quality presets from Small file to Very high, and M4A a bitrate of 64, 96, 128, 192 or 256 kbps.
  5. If you want, change the Sample rate (48000, 44100, 32000, 22050, 16000 or 8000 Hz) or the Channels. Same as source keeps the originals.
  6. Check the estimate on the line above the Save button, then press the Save button.
  7. Listen to the result in the small player, edit the file name if you like, and press Download.

M4A appears only in browsers that can encode AAC, such as Chrome, Edge and Safari 26 or later. If the Format list shows one entry fewer than you expect, the browser cannot encode AAC; pick WAV or OGG instead.

Zoom in with the plus button or the mouse wheel to choose the part precisely, and use Start here and End here to set the edges at the playhead. A long file is converted in 20-second blocks, so the progress bar moves steadily, and Cancel discards the unfinished file without affecting the original.

Does audio quality improve after converting?

No. Converting a lossy file such as MP3, AAC or OGG to WAV or FLAC gives a bigger file, but the detail that the first encoding removed does not return. Converting one lossy format to another, such as MP3 to OGG, adds a second round of loss.

For the best result, convert from the original lossless recording, and convert only once.

How is the MP3 made?

MP3 files are encoded in your browser by glint, an MIT-licensed MP3 encoder, at a constant bitrate of 128, 192, 256 or 320 kbps; variable bitrate is not offered. MP3 is written at 32, 44.1 or 48 kHz, so a source at another rate is resampled to the nearest rate of the same family, for example 22050 Hz to 44100 Hz. The file carries an Info/LAME header with the encoder delay and padding, so gapless players return the exact original length. To shorten an MP3 without re-encoding it, use the MP3 Cutter or MP3 Joiner.

What do the quality settings mean?

WAV stores every sample uncompressed; 16-bit stereo at 44.1 kHz is 1411 kbps, or 10.1 MB per minute. FLAC compresses the same data without loss, usually to about half to two thirds of the WAV size. MP3, OGG Vorbis and M4A are lossy, and their presets or bitrates trade file size against detail.

A higher bit depth only matters when the source has that precision; use 24-bit for a 24-bit FLAC or WAV and 16-bit for a CD-quality file.

Which files can I convert?

The page opens MP3, WAV, OGG, M4A, AAC, FLAC, AIFF and Opus files. WAV and AIFF are read directly, and the browser decodes the rest, so a format it cannot play shows an error. Files up to 600 MB open on a computer and 150 MB on a phone.

Decoded audio must also fit in memory: about 60 minutes of 44.1 kHz stereo on a computer and 15 minutes on a phone. The sample rate of the source is kept unless you change it, and mono stays mono.

Which format should I convert to?

Choose WAV for editing or maximum compatibility, FLAC for the same quality in a smaller file, MP3 for a file that plays almost anywhere, OGG for a small file you can play in most apps, and M4A for iPhones and iTunes. The table shows what each format is and what a 3-minute stereo song costs in size (1 MB = 1,048,576 bytes).

FormatType3-minute stereo song
WAV 16-bitUncompressed30.3 MB
WAV 24-bitUncompressed45.4 MB
FLACLossless, compressedabout 18.2 MB
OGG Vorbis (Balanced)Lossyabout 2.3 MB
M4A AAC 128 kbpsLossy2.7 MB
MP3 128 kbps (CBR)Lossy2.7 MB
MP3 320 kbps (CBR)Lossy6.9 MB

Frequently asked questions

How do I convert audio?

Open the file, choose a Format in the Save panel, adjust the options if you want, and press the Save button. Then download the converted file.

Can I convert M4A to MP3?

Yes. Open the M4A and choose MP3 in the Format list, then pick 128, 192, 256 or 320 kbps. The M4A to MP3 page does the same with MP3 preselected. Both formats are lossy, so the MP3 adds a second round of loss.

Can I extract audio from a video?

Yes, for a video file on your device. Use the Video to MP3 Converter: it opens MP4, MOV, M4V and WebM files, reads the audio track in your browser and saves an MP3, with nothing uploaded. This page is for files that are already audio.

Do I need an account?

No account is needed. The file is converted in your browser and is never sent to a server.

Can I change the sample rate and bit depth?

Yes. The sample rate can be set to 48000, 44100, 32000, 22050, 16000 or 8000 Hz, and the channels to mono or stereo. WAV offers 16-bit, 24-bit and 32-bit float, and FLAC 16-bit and 24-bit.

Can I edit the converted file too?

Only by selecting a part before converting. For other edits use Cut Audio, the Audio Joiner or the Free Audio Editor. After converting, Edit the result loads the new file for another pass.

Which audio formats can I convert online?

MP3, M4A, AAC, OGG, Opus, FLAC, WAV and AIFF can be opened. The output is MP3, WAV, OGG Vorbis, FLAC or M4A (AAC).

What happens to tags and cover art?

They are not copied into the new file. Add them again in a tag editor if you need them.