Audio Speed Changer
Choose a speed and decide whether the pitch should follow.
Free · runs in your browser · nothing is uploaded

How to change audio speed
- Press Choose audio file, or drop a file onto the page, and wait for the waveform.
- Optionally select a part. The saved file then holds only that part; with no selection it holds the whole file.
- Set Speed from 0.25 to 4 (default 1.25), by dragging the slider, typing a value, or pressing 0.5×, 0.75×, 1.25×, 1.5× or 2×.
- Keep “Keep the original pitch” ticked to leave the pitch alone, or untick it to let the pitch follow the speed.
- Press Play to preview. The preview always changes pitch with speed, because it uses the browser’s own playback rate; the saved file follows your pitch setting.
- Choose a format in the Save panel. The line above the Save button shows the new length and size.
- Press the Save button, wait for the progress bar, then listen to the result in the small player.
- Edit the file name if you like and press Download. A file at 2x takes half the original time, so a one-hour lecture becomes 30 minutes.
Left and Right move the playhead by 0.1 s (1 s with Shift) while the waveform is focused, and Escape clears the selection.
The Speed box and slider move in steps of 0.05, so 1.25 and 1.3 are both possible. The line above the Save button shows the new length, which is the original length divided by the speed, so you can aim for a target duration before saving. Pressing Stop returns the playhead to the start of the selection.
How do I speed up audio without changing the pitch?
Leave the pitch option ticked, which is the default, and set a Speed above 1. The tool then stretches or squeezes time with a WSOLA method: it works in overlapping 25 ms windows that are aligned by similarity, so the pitch of voices and instruments stays where it was while the length changes.
What is the difference between speed and pitch?
Speed is how fast a recording plays, and pitch is how high or low it sounds. Slowing a lecture to 0.75x or speeding it to 1.5x changes only the first of these when the pitch option is ticked, so the voice keeps its natural tone.
On a tape or record the two move together. With the pitch option unticked the file is just resampled that way, and the pitch shifts by 12 times the base-2 logarithm of the speed, in semitones.
Doubling the speed therefore lifts the pitch by an octave, and halving it lowers it by one.
How do I make a slowed or nightcore version of a song?
For a slowed version, untick the pitch option and choose a speed below 1, such as 0.75x. For a nightcore version, untick it and choose a speed above 1, such as 1.25x. Both change tempo and pitch together, which is the effect those styles use. To change only the pitch, use the Audio Pitch Changer.
Why can extreme speeds sound odd?
Time-stretching introduces small artifacts at extreme settings. Speech stays clear up to about 2x, while music with sustained notes may sound slightly wobbly at 0.5x or below. If the result sounds rough, move the speed closer to 1 and compare the saved files.
Because playback in the page changes pitch, judge the final sound from the result player, not from the preview. Check the saved file before relying on it for a whole lecture.
How long will the file be at a different speed?
The new length is the old length divided by the speed. A 10-minute file at 1.5x lasts 6 minutes 40 seconds, at 2x exactly 5 minutes and at 0.5x 20 minutes. If the pitch is not kept, it also shifts by 12 x log2 of the speed in semitones, shown in the last column.
| Speed | 10-minute file becomes | Pitch shift if pitch is not kept |
|---|---|---|
| 0.5x | 20 min | -12.00 semitones |
| 0.75x | 13 min 20 s | -4.98 semitones |
| 1.25x | 8 min | +3.86 semitones |
| 1.5x | 6 min 40 s | +7.02 semitones |
| 2x | 5 min | +12.00 semitones |
| 3x | 3 min 20 s | +19.02 semitones |
Frequently asked questions
How do I speed up audio without changing pitch?
Leave the pitch option ticked, set a Speed above 1 and save. The pitch stays where it was while the length shrinks.
Does slowing down audio change the pitch?
Not by default: with the option ticked the pitch stays the same. Untick it and the pitch falls with the speed.
What is the slowest and fastest speed I can set?
From 0.25x to 4x, in steps of 0.05.
Can I change speed and pitch at the same time?
Yes: untick the option and both move together. For separate control, change the speed here and the pitch on the Audio Pitch Changer page.
Will it reduce quality or sound distorted?
Time-stretching can add small artifacts at extreme settings. Close to 1x the result is clean. WAV and FLAC keep the result exactly, while OGG and M4A are lossy.
Can I speed up a video file?
This page works on audio files only, and it does not touch a video’s picture. Take the audio out of the video first, change its speed here, and put it back in your video editor.
Which formats work, and is there a limit?
MP3, WAV, OGG, M4A, AAC, FLAC, AIFF and Opus open, up to 600 MB on a computer and 150 MB on a phone. It is free, and nothing is uploaded.
Can I process many files at once?
One file at a time. Use Change file to load the next one with the same settings.
Related tools
- Audio Pitch Changer: use it to raise or lower the pitch without changing the speed.
- Reverse Audio: use it to play a clip backwards.
- Fade Out Audio: use it to end the sped-up clip softly.
- Loop Audio: use it to repeat a section before changing its speed.
- Audio Trimmer: use it to keep only the part you want.
- Normalize Audio: use it to set the level afterwards.
- Audio Converter: use it to change the format of the result.
- Free Audio Editor: use it for Faster 1.25x and Slower 0.8x steps with undo.