FLAC to MP3
Open a FLAC file and save it as MP3.
Free · runs in your browser · nothing is uploaded

How to use the FLAC to MP3 converter
- Open your FLAC file in the tool. Check that it is no larger than 600 MB on a computer or 150 MB on a phone.
- Look at the length. The decoded audio has to fit in memory, which is about 60 minutes of 44.1 kHz stereo on a computer and about 15 minutes on a phone.
- To convert only part of the file, drag across the waveform to select it, then drag either handle to adjust. You can also type an exact start, end or length as minutes:seconds.milliseconds in the three boxes under the waveform. Select all, Clear selection, Start here and End here set the selection from the playhead. With no selection, the whole file converts.
- Pick a bitrate: constant bitrate at 128, 192, 256 or 320 kbps.
- Choose mono or stereo, and a sample rate of 48000, 44100 or 32000 Hz. The default keeps the source rate when it is one of those three. Other rates are resampled to the nearest rate in the same family, such as 22050 Hz to 44100 Hz.
- Press Save as MP3 and watch the progress bar. Press Cancel to stop it.
- When it is done, download the MP3.
MP3 has no bit depth setting: a 16-bit or 24-bit FLAC goes into the same encoder, and the bitrate decides the file size.
Does converting FLAC to MP3 lose quality?
Yes. FLAC is lossless, so decoding it gives back sound identical to the original recording at its bit depth. MP3 is lossy: its encoder discards some detail permanently, and no later setting can restore it. A higher bitrate gives the encoder more data to work with, but no MP3 is a lossless copy of the FLAC. Keep the original file if you may need the full-quality recording again.
What is a FLAC file, and how is it different from MP3?
FLAC (Free Lossless Audio Codec) is a compressed format that keeps every sample of the recording. The data is packed so the file is smaller than an uncompressed WAV, yet decoding returns the exact original sound. MP3 takes the opposite approach: its encoder drops the parts of the sound a hearing model predicts you will not notice, and the file shrinks a lot. That is why a FLAC album is large while an MP3 copy is small, and why converting back to FLAC cannot recover the lost detail.
The converter keeps the source sample rate, and a mono file stays mono unless you change the channels. The MP3 starts with an Info/LAME header that records the encoder delay of 1104 samples and the padding. Gapless players use this to give back exactly the original length, and browsers show the correct duration.
How big will the MP3 file be?
The MP3 is constant bitrate, so its size is the bitrate times the length: a 3-minute song is 2.7, 4.1, 5.5 and 6.9 MB at 128, 192, 256 and 320 kbps (1 MB = 1,048,576 bytes). Mono does not make it smaller, because the bitrate stays the same. The table also shows a FLAC source for comparison.
| Length | FLAC (about 60% of WAV) | MP3 128 kbps | MP3 192 kbps | MP3 256 kbps | MP3 320 kbps |
|---|---|---|---|---|---|
| 1 min | 6.1 MB | 0.9 MB | 1.4 MB | 1.8 MB | 2.3 MB |
| 3 min | 18.2 MB | 2.7 MB | 4.1 MB | 5.5 MB | 6.9 MB |
| 5 min | 30.3 MB | 4.6 MB | 6.9 MB | 9.2 MB | 11.4 MB |
| 10 min | 60.6 MB | 9.2 MB | 13.7 MB | 18.3 MB | 22.9 MB |
Frequently asked questions
How to Convert FLAC to MP3?
Open the FLAC file, choose the bitrate, channels and sample rate, then press Save as MP3. When the progress bar finishes, download the new MP3. The numbered steps above cover each control.
How to open a FLAC file?
This tool opens FLAC files in the browser, so you can load one here. To play one, most current music players and browsers support FLAC.
How to open an MP3 file?
Nearly every music player, phone and browser plays MP3. This tool also opens MP3 files, so you can load one here to cut it or convert it.
How to convert FLAC to MP3 in Windows 11?
Open the page in a browser on your Windows 11 PC. The conversion runs in the browser, so you do not need to install a separate program. Load your FLAC, choose the settings, press Save as MP3 and download the result.
What is the best free FLAC to MP3 converter?
The right choice depends on what you need. Check for bitrate, channel and sample rate options, a way to convert only part of a file, and whether tags are kept. This tool offers 128 to 320 kbps CBR, mono or stereo, and a choice of three sample rates, but it does not copy tags.
What is the best FLAC to MP3 converter for Windows and Mac?
This tool runs in a web browser, so you do not install an app for either Windows or Mac. Use a browser that supports the page, and check the file size limits of 600 MB on a computer or 150 MB on a phone.
What is an MP3 file?
MP3 is the lossy audio format from the MPEG-1 and MPEG-2 standards. Its files are a fraction of the size of FLAC because some sound detail is removed during encoding.
Related tools
- MP3 to WAV: Use this when you need an uncompressed WAV copy of an MP3 file.
- Audio Converter: Use this when you want to convert audio between other formats.
- Compress Audio File: Use this when you need a smaller file and do not need a particular format.
- MP3 Cutter: Use this when you want to trim an MP3 before saving it.
- Cut Audio: Use this when you want to cut a section out of an audio file.
- Audio Splitter: Use this when you want to split one audio file into several parts.