MP3 Converter
Open an audio file and save it as an MP3.
Free · runs in your browser · nothing is uploaded

How to use the MP3 Converter
- Open the audio file you want to convert. The supported types are WAV, M4A, AAC, OGG, Opus, FLAC, AIFF and MP3.
- Wait for the waveform to appear under the file name.
- To convert only part of the file, drag across the waveform. Drag either handle to adjust the selection. You can also type an exact start, end or length as minutes:seconds.milliseconds in the three boxes under the waveform.
- Start here and End here set the selection from the playhead; Select all selects the whole file.
- In the Save panel, choose a bitrate: 128, 192, 256 or 320 kbps. 128 kbps is selected first.
- Set the channels to keep the original, or choose mono or stereo.
- Press Save as MP3 and watch the progress bar. Click Cancel if you need to stop it.
- Check the result in the small player, then press Download.
Clear selection removes your selected part so you can start over. Tags and cover art are not copied into the new file.
The line above the Save button shows the length of the result and its estimated size, which follows the bitrate exactly because the MP3 is constant bitrate. After the save, the result line gives the real size and length, and you can rename the file before downloading it.
What bitrate should I choose for an MP3 file?
The bitrate sets how much data each second of the MP3 gets: 128 kbps makes the smallest file, 320 kbps the largest, and a higher bitrate leaves the encoder more room to keep detail. Every option is constant bitrate (CBR); variable bitrate (VBR) is not offered. The file size grows in step with the bitrate.
| Bitrate | Size per minute of audio |
|---|---|
| 128 kbps (default) | 0.92 MB |
| 192 kbps | 1.37 MB |
| 256 kbps | 1.83 MB |
| 320 kbps | 2.29 MB |
Sizes use 1 MB = 1,048,576 bytes.
Does converting to MP3 lower the sound quality?
Yes, it can. Converting a lossless file such as WAV, FLAC or AIFF to MP3 discards detail permanently, so keep the original file. Converting a lossy file such as M4A, AAC, OGG or an existing MP3 adds a second round of loss on top of the first. A higher bitrate removes less detail, but it cannot bring back what was already lost.
Why does the sample rate change during conversion?
MP3 is written at 48000, 44100 or 32000 Hz, which are the sample rates of MPEG-1 MP3. A source already at one of these rates keeps its rate. Other rates move to the matching family: 22050 or 11025 Hz become 44100 Hz, 24000 or 96000 Hz become 48000 Hz, and 16000 or 8000 Hz become 32000 Hz. The decoder runs at the file’s own rate before this mapping applies.
Why does the converted MP3 have a header?
The file starts with an Info/LAME header that records the encoder delay of 1104 samples and the padding at the end. Gapless players, including ffmpeg-based apps, Chrome and Safari, use it to play exactly the original length, and browsers read the duration from it. Because the header records the length, the new file plays back at the same duration as your source.
How long can the audio be?
The file limit is 600 MB on a computer and 150 MB on a phone. The decoded audio also has to fit in memory, which is about 60 minutes of 44.1 kHz stereo on a computer and about 15 minutes on a phone. A 10-minute stereo file at 44.1 kHz is about 212 MB once decoded, so long recordings are best split first.
How big will the MP3 be?
MP3 files from this page are constant bitrate, so the size is the bitrate times the length and does not depend on the music: 128 kbps is 0.9 MB per minute and 320 kbps 2.3 MB. Mono does not make the file smaller, because the bitrate stays the same. The table compares the four bitrates with a 16-bit stereo WAV (1 MB = 1,048,576 bytes).
| Length | WAV 16-bit stereo | MP3 128 kbps | MP3 192 kbps | MP3 256 kbps | MP3 320 kbps |
|---|---|---|---|---|---|
| 1 min | 10.1 MB | 0.9 MB | 1.4 MB | 1.8 MB | 2.3 MB |
| 3 min | 30.3 MB | 2.7 MB | 4.1 MB | 5.5 MB | 6.9 MB |
| 5 min | 50.5 MB | 4.6 MB | 6.9 MB | 9.2 MB | 11.4 MB |
| 10 min | 101 MB | 9.2 MB | 13.7 MB | 18.3 MB | 22.9 MB |
Frequently asked questions
Does this tool download from YouTube?
No. It converts audio files already on your device and does not connect to YouTube, so no YouTube account or sign-in is involved.
Is the MP3 Converter free to use?
Yes. There is no sign-up and no watermark; only the device limits in the section above apply.
Is my file uploaded?
Your audio is not uploaded. The conversion runs in your browser on your device, and the encoder is glint, an independent MP3 encoder released under the MIT licence.
Does it work on Android and iPhone?
It runs in the phone’s browser, with nothing to install. Phones have tighter limits: 150 MB per file and about 15 minutes of decoded stereo audio. Encoding is slower on a phone than on a computer, and the progress bar shows how far it is.
Can I convert a video file to MP3?
Not with this page. Video files are not on the supported list, so use an audio file such as WAV, M4A or AAC that you already have.
Do I need to install any software or app?
No. Because the converter runs in your browser, there is nothing to download or install. The only file you get is the MP3 you choose to save.
Can I convert only part of a file?
Yes. Drag across the waveform, or type exact start and end times as minutes:seconds.milliseconds. With no selection, the whole file is converted.
Are tags and cover art copied?
No. Tags and cover art are not copied into the new MP3, so add them afterwards if you need them.
Related tools
- Audio Converter: use it when you want a format other than MP3 as the output.
- Compress Audio File: use it when your file is too large and you need a smaller version.
- MP3 to WAV: use it when you need an uncompressed WAV copy of an MP3.
- M4A to WAV: use it when you want to turn an M4A file into WAV.
- OGG to WAV: use it when an OGG file needs to become WAV.
- MP3 Cutter: use it to shorten an MP3 without re-encoding it.
- Cut Audio: use it to trim any supported audio file to the part you need.
- Audio Splitter: use it when you want to divide one recording into several pieces.