Trim, cut and convert audio in your browser

MP3 Joiner

Add the MP3 files, set the order and download one MP3 with the original quality.

Free · runs in your browser · nothing is uploaded

Open on Tone Snip

This embed was switched off for this website. Open on Tone Snip

Want this audio tool on your own site? The embed code is on the about page. Embed code

This MP3 joiner copies the compressed frames of each file, in the order you set, into one new MP3 and writes a fresh header with the total length. Nothing is decoded in between, so the sound is not changed. Add the files, reorder them with the arrows, remove any you do not need, and save. The default save, “MP3 (original quality, no re-encoding)”, is offered when every file is an MP3 with the same sample rate and channel count. For other file types, or when you want a crossfade between clips, the other formats in the list (a re-encoded MP3, WAV, OGG, FLAC or M4A) decode the sound and encode it again.
Mp3 joiner example

How to join MP3 files

  1. Press Choose audio files and select your MP3 files, or drop them onto the page. Add more later with Add more files.
  2. Check the list. Each row shows the name, length, sample rate and channels.
  3. Move a file earlier or later with the up and down arrows, and remove one with ×. The order in the list is the order in the result.
  4. Leave the Format list on “MP3 (original quality, no re-encoding)” for a lossless join.
  5. Press Save as MP3, wait for the progress bar, and listen to the result in the small player.
  6. Edit the file name if you like, then press Download.

The lossless join needs files that are alike. If they differ in sample rate, MPEG version or channel count, pick one of the re-encoding formats instead; those formats also need one sample rate for all files.

Playing the joined file from start to finish in the result player is the quickest check. Listen to each join before you download, since a lossless join is not crossfaded and may leave a short gap. For a crossfade, choose one of those other formats too. The Crossfade control runs from 0 to 5 seconds and is hidden while the lossless MP3 save is selected.

How can I merge MP3 files without losing quality?

Copy their compressed frames straight into one file, so the audio is never decoded. The tool writes the frames of the first file, then those of the next, and adds a new Xing or Info header with the total length.

Different bitrates are fine, but the files must match in sample rate, MPEG version and channel count. An MP3 is a sequence of small frames, which is why this copy needs no decoding.

What happens at each join?

MP3 frames can borrow data from the frames before them, and at a join the previous frame belongs to another file. The tool skips the first frame or two of each later file, until it reaches one that stands alone. A frame lasts about 26 ms at 44.1 kHz, and nothing is skipped if the first frame already stands alone.

The lossless join is not crossfaded, and any silence an encoder added at the end of a file stays, so a short pause between clips is possible. The Silence Remover can tighten it afterwards.

Pieces cut with the MP3 Cutter or the Audio Splitter start with a few frames from just before the cut point, because an MP3 needs them to start cleanly. When you join pieces of the same MP3 back together, those frames match the end of the previous piece and the tool drops them, so the seams are seamless. A piece that does not continue the one before it, such as one cut from a different song, keeps its lead-in, and you hear about 50 to 100 ms of the sound before its cut point at that seam; the page tells you when this happens. Save in a re-encoding format to join such pieces without the repeat.

Can I add files that are not MP3?

Yes. WAV, OGG, M4A, AAC, FLAC, AIFF and Opus files open as well, but as soon as one of them is in the list the lossless MP3 save disappears and only the re-encoding formats remain. Keep the list to MP3 files if you want the frames copied unchanged.

When does a join need re-encoding?

When the files do not match, or you want a crossfade. The other formats decode every clip to raw audio and encode the result once. That needs one sample rate for all files, and the output is a new generation of processing, so choose WAV or FLAC if you want to keep the decoded sound exactly.

Which MP3 files can be joined without re-encoding?

Files can be joined losslessly when they share a sample rate, an MPEG version and a channel count. Different bitrates are fine, because every frame states its own size. The table checks common pairs; anything marked no needs another save format, which decodes and re-encodes the sound.

File 1File 2Lossless join?
44.1 kHz stereo 128 kbps44.1 kHz stereo 192 kbpsYes (bitrates may differ)
44.1 kHz stereo44.1 kHz joint stereoYes (both two channels)
44.1 kHz stereo48 kHz stereoNo (sample rate differs)
44.1 kHz stereo44.1 kHz monoNo (channel count differs)
44.1 kHz (MPEG-1)22.05 kHz (MPEG-2)No (version and rate differ)

Frequently asked questions

Is the MP3 joiner free?

Yes, and it needs no account.

How can I merge two MP3 songs into one?

Open both songs, put them in order with the arrows, keep the default lossless format and press the Save button. One MP3 comes out, with the second song following the first.

Will joining MP3 files lower the quality?

Not with the default save, because the frames are copied without decoding. The re-encoding formats process the audio again.

Can I join MP3 files with different bitrates?

Yes. Bitrates may differ, but sample rate, MPEG version and the number of channels must match for a lossless join.

Can I crossfade between clips?

Yes, with any re-encoding format. Set Crossfade between 0 and 5 seconds. It uses an equal-power curve and makes the result shorter by that length for each join.

How do I overlay audio or add music to an MP3?

This tool places files one after another. To play tracks at the same time, for example a voice over music, use the Audio Mixer.

Can I trim the files before joining?

Not on this page. Cut each file first with the MP3 Cutter, download the results, then add them here. Pieces of the same MP3 join back seamlessly. A piece that does not continue the one before it, such as one cut from a different song, starts with about 50 to 100 ms from before its cut point, which a lossless MP3 join cannot hide, so save those in a re-encoding format.

What is the file size limit?

600 MB per file on a computer and 150 MB on a phone. For the other formats the decoded audio must also fit in memory: about 60 minutes of 44.1 kHz stereo on a computer and 15 minutes on a phone.